Please note: this is a slightly used (great condition) unit. The only problem is that the built in mic seems to work intermittently but doesn’t affect the monitoring.

The Allen & Heath ME-1 Personal Mixer puts the musician in control of their own monitor mix. Each performer can be given a tailored setup that works perfectly for them, whether they crave maximum control over the fine details of their mix or just want the minimum of keys to press. Operation is intuitive and elegant, with simple controls, clear visual feedback and custom naming for instant familiarity.

ME-1 is the cornerstone of the ME Personal Mixing System and is ready to use with the Allen & Heath iLive and GLD series digital mixers. ME-1 is complemented by the ME-U hub, which opens up the benefits of ME to users of other professional digital mixers via Dante, EtherSound or MADI. ME-1 also has an Aviom® compatibility mode for use with Aviom® Pro16® systems.

Allen & Heath ME-1 Personal Mixer Features:

• Fully customizable
• Intuitive operation
• Compact, smart design
• 40 sources from GLD or iLive
• Compatible with MADI, Dante or EtherSound via ME-U hub
• Daisy chain or use standard PoE Ethernet hubs
• 16 assignable keys to suit application

Allen & Heath ME-1 Personal Mixer Specifications:

• Inputs: 40 inputs (Cat5), Stereo Aux, Ambient Mic
• Outputs: 2x Stereo (Line or Headphones), Mono Line Out
• Input Control: Level, Mute, Pan, Solo, Trim All
• Master Control: Level, Mute, 3-band EQ, Limiter
• Group Control: Level, Mute, Level/Pan for sources within Group
• Groups: 16, Up to 40 sources assignable
• Presets: 16, Store input Levels, Mutes, Pans, Key assign, Names, Group sources
• Config: Stores Setup and all Presets
• Names: Channels, Keys, Unit, Presets, Config
• USB Data Port: Individual Presets or Config transfer, Firmware update
• Cat5 Audio and PoE: Link In and Link Out, locking EtherCon connectors
• Stereo Out:
  • Stereo 1/4″ and 3.5mm Jacks
  • Headphones 300mW 300mW into 100 ohm load
  • Max 21dBu
• Mono Output:
  • Balanced TRS Jack
  • Nominal 0dBu, Max 18dBu
• Aux Input:
  • Stereo 3.5mm Jack
  • Nominal -8dBu, Max 10dBu
  • Input Impedance >10kOhm
• AD/DA Conversion: 24-bit Delta/Sigma, 48kHz
• Residual Output Noise: -95dBu (Level down, 20-20kHz)
• Frequency response: 0/-1dB 10Hz to 20kHz
• Mains Power Unit (supplied): 100-240V AC, 50/60Hz in, 12V DC 1.25A out
• Power over Cat5 cable (PoE): 10W (Requires 13W from PoE hub)
• Dimensions: 8.9″ W x 5.9″ D x 2.2″ H (225 x 150 x 55 mm)
• Weight: 2 lbs (900g)